Decal Application
1.Be sure your surface is completely clean of all dirt or wax. Clean thoroughly with detergent and water then dry.
2 Remove backing from application tape. To do this carefully peel back the application tape with the decal attached to the tape then discard the backing (wax paper).
3.Spray the surface (that you’re Appling the decal to) with a very mild detergent/water mix, approx 1 drop detergent to 500ml spray bottle water. Mist the surface, DO NOT OVER SPRAY. Place the application tape on to the desired surface. Carefully remove all air bubbles by applying pressure on the label, using a plastic spatula. Working from the middle out when possible. Allow to dry before removing the tape.
4. Finally slowly remove the application tape checking as you go that the vinyl has adhered to the surface. Be careful washing your new decal for the first couple of weeks.